 |
| Loctite 243 10ml |
Effective on all types of metal threaded fasteners. Prevents lossening on vibrating parts such as pumps, motor mounting bolts, gear boxes or presses. Contains a cutting additive for high oil tolerance
Strength: Medium
Maximum Temp: 150 degress celsius
Unique Features: High Oil Tolerance
|
| |
| Part Number08-010101 |
|
Price: $14.80 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 243 50ml |
Effective on all types of metal threaded fasteners. Prevents lossening on vibrating parts such as pumps, motor mounting bolts, gear boxes or presses. Contains a cutting additive for high oil tolerance
Strength: Medium
Maximum Temp: 150 degress celsius
Unique Features: High Oil Tolerance |
| |
| Part Number08-010114 |
|
Price: $47.20 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 262 10ml |
For use on all metal fasteners (including stainless steel and those with protective coatings such as zinc), where permanent locking and sealing is required.
Strength: High
Maximum Temp: 150 Degrees Celsius
Unique Features: Use on all Metals |
| |
| Part Number08-010115 |
|
Price: $14.80 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 262 50ml |
For use on all metal fasteners (including stainless steel and those with protective coatings such as zinc), where permanent locking and sealing is required.
Strength: High
Maximum Temp: 150 Degrees Celsius
Unique Features: Use on all Metals |
| |
| Part Number08-010102 |
|
Price: $47.20 inc GST
|
|
| |
| More Information |
|
|
|
|
|
|
 |
| Loctite 406 25ml |
General purpose adhesive for difficult top bond surfaces. Bonds Santoprene rubbers, polyolefin plastics and elastomers when used in conjuction with Loctite 770 Polyolefin Primer.
Also available in higher viscosity grade, Loctite 401 25ml.
What are you bonding: Difficult surfaces
Do you require instant adhesion? 5-20 seconds
Is the surface porous? Non-Porous
Unique Features: Instant Fixture and Bonds Most Plastics |
| |
| Part Number08-010104 |
|
Price: $20.55 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 480 25ml |
Black rubber toughened grade for bonding metal to metal and metal to rubber; especially suitable with applications where high peel strength is required and/or shock loads are present.
What are you bonding: Rubber/Metal
Do you require instant adhesive? 60-120 secs
Unique Features: Rubber Toughened and High Peel Strength |
| |
| Part Number08-010105 |
|
Price: $25.90 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 515 Flange Sealant 50ml |
Recommended for coating and re-using gaskets to improve sealing.
What size is the gap? Less than 0.5mm (Anaerobic Sealants)
Is the flange Rigid or Flexible? Rigid (Metal to Metal)
What is the flange material? Metal
Maximum Temp: 150 Degrees Celsius
Unique Features: Use with shims |
| |
| Part Number08-010106 |
|
Price: $30.80 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 518 Flange Sealant 50ml |
Recommended for use on rigid iron, steel and slumiium flanges e.g. aluminium gearbox and engine castings, etc.
What size is the gap? Less than 0.5mm (Anaerobic Sealants)
Is the flange Rigid or Flexible? Rigid (Metal to Metal)
What is the flange material? Alloy/ Alluminium
Maximum Temp: 150 Degrees Celsius
Unique Features: Easy Disassembly |
| |
| Part Number08-010123 |
|
Price: $33.20 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 567 Thread Sealant 50ml |
Recommended for all course metal threads where slow cure is required to prolong time frame for adjusting valves and fittings.
Are the pipe threads metal or plastic? Metal Only
What will flow through pipes? General use
Are the threads fine or course? Course - up tp 76mm (3")
What approvals are required? Gas
Unique Features: High Tempreature +204 Degrees Celsius |
| |
| Part Number08-010107 |
|
Price: $29.10 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 577 Thread Sealant 50ml |
Recommended for all course metal threads. Suitable for applications at low tempreatures requiring fast cure.
Are the pipe threads metal or plastic? Metal Only
What will flow through pipes? General use
Are the threads fine or course? Course - up tp 76mm (3")
What approvals are required? Gas
What approvals are required? Potable Water/Gas
Unique Features: Locks Thread (17Nm) |
| |
| Part Number08-010108 |
|
Price: $29.10 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 587 Thread Sealant 50ml |
Recommended for sealing all types of flanges including stamped sheet metal where high flexibilty and high oil or water glycol resistance is required. Oxygen sensor safe. What size is the gap? up to 6.0mm (Silicone Sealants)
Is the flange Rigid or Flexible? Flexible (Stamped Metal Assemblies)
What is the flange material? Metal or Non-Metal
Maximum Temp: 260 Degrees Celsius
Unique Features: Heat Oil Resistance |
| |
| Part Number08-010111 |
|
Price: $18.30 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 641 10ml |
A controlled strength retaining compounding, ideal for cylindrical parts that require disassembly; e.g. retention of bearings onto shafts and into housings.
Is the assembly badly worn? No (Gaps to 0.25mm)
Do you require lubricity for interference fit? No
Strength: Low
Maximum Temp: 150 Degrees Celsius
Unique Features: Easy Disassembly |
| |
| Part Number08-010124 |
|
Price: $16.70 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 641 50ml |
A controlled strength retaining compounding, ideal for cylindrical parts that require disassembly; e.g. retention of bearings onto shafts and into housings.
Is the assembly badly worn? No (Gaps to 0.25mm)
Do you require lubricity for interference fit? No
Strength: Low
Maximum Temp: 150 Degrees Celsius
Unique Features: Easy Disassembly |
| |
| Part Number08-010124 |
|
Price: $16.70 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 680 50ml |
Gives best risistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys, and similar cylindrical parts.
Is the assembly badly worn? No (Gaps to 0.25mm)
Do you require lubricity for interference fit? No
Strength: High
Maximu Temp: 150 Degrees Celsius
Unique Features: Quick Cure |
| |
| Part Number08-010122 |
|
Price: $49.30 inc GST
|
|
| |
| More Information |
|
|
|
 |
| Loctite 7471 125g |
Use to increase the cure speed of Loctite brand anaerobic products, especially at low temperature, in applications with passive metals or inert surfaces, or where large gaps are involved.
Do you need an activator or primer? Activator - Accelerate cure or promote cure in large gaps or at low temperature <5 degrees celsius |
| |
| Part Number08-010110 |
|
Price: $16.20 inc GST
|
|
| |
| More Information |
|
|
|
